SWITCH STICK TEST EQUIPMENT Hanco's full line of switch stick testers ensure line worker protection with full stick voltage testing.





  • The units are available in front-loading or top-loading models (low profile units)
  • Portable units are also available, offering a locking ability to test any size stick while also folding down to a compact size
  • Units provide a full high voltage electrical test of sticks (as required by OSHA)
  • Sticks can be tested wet or dry
  • Stick testers are available in widths of 14 or 21 feet and can accommodate from one through six units
  • Test units are available for stick testing, as well as combination test which test all of hose or sticks in the same unit
  • Portable fiberglass stick tester models are available in 4', 5' and 6' models which can interconnect to test the complete stick length, while also being able to fold to a convenient, compact size
  • Portable Stick Tester may be sold by itself or as a combination unit with a 0-50KVAC High Voltage, Inc. hipot


Standard Features:


  • Automatic digital fault detection, digital load sensing, digital leakage readout and power cycle
  • Standard 50KVAC power supply with optional 100KVDC power supply or a combination for both AC and DC testing
  • The high voltage test compartment contains mechanical grounding devices and safety interlock system with audible and visual warning signals covering all entries into the test cabinet for full operator safety and protection.
  • Microprocessor-controlled
  • PLC is self-diagnostic
  • All cabinets are made with formed 12-gauge steel, coated with primer and two coats of epoxy paint. Cabinets are rust and corrosion resistant
  • Automatic ozone depletion and dispersal system with programmed delays to insure complete removal of ozone from the testing cabinet
  • Digital voltmeter indicator
  • Leakage reading with a single set point for all test positions
  • Leakage digital milliamp monitor during the entire duration of the test
  • Voltmeters programmed to save peak voltage
  • Digital cycle timer
  • Insufficient air pressure warning indication
  • Control system has option for either manual or automatic cycle operation
  • Standard input voltage is 240V single phase with other inputs optional (specify when ordering)
  • Standard A.B. Panelview control system with full color display



Hanco also offers:


  • CAD-designed lab layouts with all equipment needed for a turnkey lab operation
  • Technical phone support
  • Complete field service support
  • On-site operator training and certification
  • On-site equipment calibration, inspection and certification (as required by ASTM and OSHA). All systems are checked as required for full compliance.




Request a quote today. (sales@hanco.com)


All of our cabinets are locally

manufactured by our partners

at Tri-Fab, Inc.

In compliance with:

 and IEC, IEEE and

OSHA 1910 Standards

 Authorized Hanco Distributors:



HANCO INTERNATIONAL A Division of the Hannon Company 1605 Waynesburg Drive S.E. Canton, Ohio 44707 Phone: (330) 456-4728 Fax: (330) 456-3323 Email: sales@hanco.com support@hanco.com

© 2016 The Hannon Company. All Rights Reserved.

Site Last Updated: 08/20/2020